Tips for Supporting Comfortable Dexcom G7 Wear with Overlay Patches

Looking to personalize your Dexcom G7 continuous glucose monitor (CGM) wear and support comfort during daily activities? Proper skin preparation and using optional overlay patches can help support a comfortable experience — while adding a bit of personal style.

Here’s your step-by-step guide to supporting adhesion comfort and CGM wear with Pump Peelz decorative overlay patches.

Dexcom G7 Patch Prep: The Essentials

1️⃣ Prep Your Skin

• Clean the Application Site: Wash with oil-free soap and water; dry thoroughly.

• Trim Hair: Use electric clippers for a smoother surface without irritation.

• Use a Barrier Spray: If recommended by your healthcare provider, apply a product such as Cavilon No-Sting Barrier before sensor and patch application.

• Let Skin Dry Completely: Apply in a cool, dry room — never immediately after a shower.

2️⃣ Choose the Right Spot

• Opt for flat, low-movement areas (like the back of your upper arm).

• Rotate sites to help support skin health and comfort.

Supporting Adhesion Comfort with Overlay Patches

Pump Peelz decorative overlay patches are designed to complement CGM adhesives and add a layer of personal style to your Dexcom G7 wear.

Overlay Patch Features:

✔️ Designed to complement CGM adhesives during daily activities
✔️ Water-resistant materials
✔️ Hypoallergenic, latex-free, skin-friendly adhesive materials
✔️ Pre-cut for easy application
✔️ Wide range of designs for personal expression

How to Apply an Overlay Patch

1️⃣ Ensure your sensor and surrounding skin are clean and dry.
2️⃣ Wait 15–30 minutes after applying the sensor before adding an overlay patch.
3️⃣ Align the overlay patch cutout over your Dexcom G7 sensor.
4️⃣ Press down firmly from the center out, smoothing the edges.

First 12 Hours: Supporting Adhesion Comfort

For the first 12 hours after applying an overlay patch, it’s helpful to avoid moisture and heavy sweating. Gently pat dry after any water exposure — never rub.

Daily Tips for Wear Comfort

• Pat Dry: After water exposure, use a towel to pat the patch dry.

• Trim Peeling Edges: If any edges begin lifting, use clean scissors to carefully trim them.

• Check Edges Daily: Gently smooth out any air bubbles or wrinkles if needed.

• Rotate Application Sites: Rotate sites with each new sensor to help support skin health.

Why Choose Pump Peelz Overlay Patches?

Pump Peelz decorative overlay patches are designed in the USA, latex-free, and hypoallergenic — providing a fun way to personalize your CGM wear and support comfortable device wear during everyday activities.

Subscription benefits: Save 15%, free shipping, and enjoy new designs all year long.

Disclaimer: This content is for general informational purposes only and does not constitute medical advice. Please consult your healthcare provider regarding adhesive use, skin preparation, and skin care for your device. Individual experiences with adhesives may vary. Pump Peelz decorative overlay patches are not a replacement for manufacturer adhesives or overpatches, nor are they intended to improve device performance, security, or accuracy.